Nissan Skyline Owners Manual. Related Models. Nissan Official Website. Never miss out: Get notified when new Nissan Skyline documents are added. After you turn on the power for the first time, do not turn it off until you have set up the operating system.
Press the computer's power button. Your computer may take a while the next time you turn it on, if: The battery pack was exhausted and is now recharged. The battery pack was exhausted but now has the power connected via the AC adaptor. The Windows Startup Screen will be the first screen displayed when you turn on the power. Follow the on-screen instructions on each screen in order to properly install the operating system.
When it is displayed, be sure to read the License Terms carefully. For detailed information on what is new and how to operate Windows operating system, please refer to the Windows Help and Support. The Start screen is the launching pad for everything you can do in the Windows operating system, providing new and easy ways to access everything from your favorite apps and Web sites to your contacts and other important information.
From the Start screen, you can just start typing to search for what you want. From there, you can easily switch between results for apps, files, and more. Use the Windows Charms to start apps, find documents, set up system components, and perform most other computing tasks. By pointing the mouse pointer to the upper or lower right corner of your screen, you will find a list of charms: Search , Share , Start , Devices and.
Typical Start screen tiles are the Desktop tile and Mail tile, as well as tiles representing all other applications downloaded to your system. Although many applications will be pre-installed or built-in to your computer, you will also have the ability to download many other applications at the click of your mouse. In the Windows Store you can search for and browse thousands of apps, all grouped into easy to find categories.
Windows offers a number of sign-in options including Password , PIN and Picture password authentication to prevent from. You are allowed to select an option on the Windows login screen by clicking sign-in options if you have multiple sign-in methods set for a user account. Password authentication is the default sign-in option.
For more information, please refer to Utilities and Advanced Usage. When you turn off the power in Shut Down Mode, no data will be saved and the computer will boot to the operating system's main screen the next time it is turned on. If you turn off the power while a disk disc is being accessed, you may lose data or damage the disk.
Never turn off the power while an application is running. Doing so could cause loss of data. Doing so can cause data loss. Click the Settings charm. Click Power and then select Shut down. Turn off any peripheral devices connected to your computer.
Do not turn the computer or peripheral devices back on immediately - wait a short period to avoid any potential damage. In the Settings charm, click Power and then select Restart. If you have to interrupt your work, you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode.
In this mode data is maintained in the computer's main memory. When you turn on the power again, you can continue working right where you left off. When you have to turn off your computer aboard an aircraft or in places where electronic devices are regulated or controlled, always completely shut down the computer.
This includes turning off any wireless communication functionalities, and cancelling settings that reactivate the. Failure to completely shut down the computer in this way could allow the operating system to reactivate and run pre-programmed tasks or preserve unsaved data, which could interfere with aviation or other systems, possibly causing serious injury.
Do not switch to Sleep Mode while transferring data to external media, such as USB devices, memory media or other external memory devices, as data will be lost. Do not remove the battery pack while the computer is in Sleep Mode unless the computer is connected to an AC power source , as data in memory could be lost.
To restore the operation of the computer from Sleep Mode, press and hold the power button or any key on the keyboard for a short amount of time. If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode. Restores the previous working environment more rapidly than the Hibernation Mode feature. Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Sleep Mode feature.
In the Settings charm, click Power and then select Sleep. Close the display panel. Please note that this feature must be enabled within the Power Options. Press the power button. When you turn the power back on, you can continue where you left off when you shut down the computer. If you are operating the computer on battery power, you can lengthen the overall operating time by turning it off into Hibernation Mode - Sleep Mode will consume more power while the computer is off.
Memory circuits are exposed to static electricity or electrical noise. The battery power is exhausted and the AC Adaptor is not connected. Please note that the Hibernation Mode feature does not save the status of any peripheral devices connected to the computer. Save your data. However, for safety sake, it is best to save your data manually. Data will be lost if you disconnect the AC adaptor before the save is completed. Do not switch to Hibernation Mode while transferring data to external media, such as USB devices, memory media or other external memory devices, as data will be lost.
You can return to your previous working environment immediately when you turn on the computer. Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Hibernate feature. Click Power and then select Hibernate. In order to show Hibernate in Power menu, you need to setup according to the following steps:.
Click Choose what the power button does or Choose what closing the lid does. Click Change settings that are currently unavailable. Select the Hibernate check box from Shutdown settings. Click the Save changes button. The computer can be configured to enter Hibernation Mode automatically when you press the power button or close the lid. In order to define these settings, you can follow the steps as described below:.
Click Power Options and then click Choose what the power button does or Choose what closing the lid does. Do not turn the computer or devices back on immediately.
Wait a moment to let all capacitors fully discharge. This chapter identifies the various components of the computer - it is recommended that you become familiar with each before you operate the computer. Please handle your computer carefully to avoid scratching or damaging the surface.
The following figure shows the front of the computer with the display panel in the closed position. Power indicator The Power indicator normally glows white when the computer is turned on. However, if you turn the computer off into Sleep Mode, this indicator will flash amber. The Wireless communication indicator glows white when the Wireless functions are turned on. The Wireless WAN indicator glows blue when. Do not block the cooling vents.
Keep foreign metal objects, such as screws, staples and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. USB 3. Please note that it is not possible to confirm the operation of all functions of all USB devices that are available. Some functions associated with a specific device might not operate properly.
Keep foreign metal objects, such as screws, staples and paper clips, out of the USB port. Refer to the Memory media section for more information. Keep foreign metal objects, such as screws, staples and paper clips, out of the Memory media slot. It could cause damage or malfunction.
Security lock slot A security cable can be attached to this slot and then connected to a desk or other large object in order to deter theft of the computer. The following figure shows the underside of the computer.
You should ensure that the display is closed before the computer is turned over to avoid causing any damage. Keep foreign objects out of the docking port. A pin or similar object can damage the computer's circuitry. This section shows the computer with the display panel open.
In order to open the display, lift the display panel up and position it at a comfortable viewing angle for you. Do not touch or press strongly on the web camera lens. Doing so may reduce image quality. Use an eyeglass cleaner cleaner cloth or other soft cloth to clean the lens if it becomes dirty.
Fingerprint Sensor This sensor enables you to enroll and recognize a fingerprint. Monitor , and then click PC Information. SSD is a large-capacity storage media which uses Solid-State Memory in place of a magnetic disk of the hard disk. Memory module The memory module is installed in the computer.
The Display Power Saving Technology feature is enabled at factory default. Right-click on the desktop and click Graphics Properties Click Power and select On battery. Click Apply. If you want to enable this feature, under the conditions mentioned above, click On under Display Power Saving Technology. Click Power. Select On battery from the drop-down menu in Power Source. Clear the Display Power Saving Technology check box. Click OK. If you want to enable this feature, under the conditions mentioned above, select the Display Power Saving Technology check box.
The computer will switch to Hibernation Mode after two hours of Sleep Mode. Launch the BIOS setup utility. Select Advanced. If the Immediately option is selected, the computer will switch to Hibernation Mode immediately after your computer goes into the Sleep Mode.
When you carry your computer aboard on an aircraft or in places where electronic devices are regulated or controlled, always power off your computer. The Windows cannot be restored normally if the battery is exhausted when the computer is moving from Sleep Mode to Hibernation Mode. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox.
Please check your email for further instructions. Enter a new password. Portege RA. User's Manual ii. User's Manual iii. First edition October Copyright authority for music, movies, computer programs, databases and other intellectual property covered by copyright laws belongs to the author or to the copyright owner.
Disclaimer This manual has been validated and reviewed for accuracy. User's Manual Realtek is a registered trademark of Realtek Semiconductor Corporation. Regulatory Information The regulatory information herein may vary. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Operation is subject to the following two conditions: 1. For example, the following environments are not approved: Industrial Environments e. The consequences of the use of this product in non-approved working environments may be: Interference with other devices or machines in the near surrounding area.
Following information is only valid for EU-member States: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste.
Following information is only for India: The use of this symbol indicates that this product may not be treated as household waste. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. The implementation was written so as to conform with Netscapes SSL.
All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young eay cryptsoft. If you include any Windows specific code or a derivative thereof from the apps directory application code you must include an acknowledgement: "This product includes software written by Tim Hudson tjh cryptsoft.
As a consequence, its main points are that: We don't promise that this software works. Contacts There are two mailing lists related to FreeType: freetype nongnu. Disposing of the computer and the computer's batteries Discard this computer in accordance with applicable laws and regulations. Find a dealer. Get personalized support via My Canon Account. Access your account, or create a new account, click here to get started. Want to register this product? Register Product.
Operating System. Select OS Version. Drivers Software Firmware Utilities Loading There is no driver for the OS Version you selected. The driver may be included in your OS or you may not need a driver. There is no software for the OS Version you selected. There is no firmware for the OS version you selected. There is no utility for the OS Version you selected. Search Our Knowledge Base Please enter your question: Examples: "prints missing colors", "flashing power light", "setting the white balance".
There are no Recommended Downloads available. This Limited Warranty covers all defects encountered in normal use of the Equipment and does not apply in the following cases: Loss or damage to the Equipment due to abuse, mishandling, accident, improper maintenance, or failure to follow operating instructions; If the Equipment is defective as a result of leaking batteries, sand, dirt or water damage; If defects or damages are caused by the use of unauthorized parts or by service other than by Canon USA's factory service centers or authorized service facilities; This Limited Warranty does not cover cabinet exterior finish , video cassette tape, head cleanings, nor does it apply to Equipment purchased outside the United States.
Main Unit Specs. Standard Definition or High Definition. Television System. Video Recording system. Image Sensor. Total Pixels. Effective Pixels. Video: Approx. Maximum recording Time. Focusing System. Manual Exposure. Programmed AE. Max Shutter Speed. Minimum Focusing Distance. Recording in monaural for double the normal recording time of an MD.
For longer recordings, choose to record in monaural sound. The recording time becomes double the normal. To stop recording, press.
The recorder switches back to stereo recording when you record the next time. Adjusting the recording level Manual recording. When you record with an analog input, the sound level is adjusted automatically. If necessary, you can set the level manually. Set the level so that it hits the second indicator from the top when the recorder receives the maximum sound. Note The recording level should be adjusted while the recorder is in standby mode. You cannot adjust it while recording.
The recording level control is switched back to automatic control. Checking the remaining time or the recording position. To know the recording conditions The record indicator lights up or flashes according to the recording condition.
If you want to check the playing position or track name while playing, see Checking the remaining time or the playing position. Setting the clock to stamp the recorded time.
To stamp the date and time on the MD when you record, you first need to set the clock. When you use the recorder for the first time or after a long period of disuse, charge the built-in battery for the clock after setting the clock. Use a pointed object. The digits of the year flash. If you make a mistake while setting the clock Press , and set the clock again from step 2. You can skip a set by pressing. To display the current time When the recorder is not operation or while recording, press DISPLAY repeatedly until the current time appears in the display.
Charging the built-in battery for the clock After setting the clock, leave the recorder connected to the AC power for about 2 hours to charge the built-in battery for the clock. Once charged, the built-in battery should last about a month without connecting to any of the power sources. The recorder will automatically charge the built-in battery while connected to AC power, dry batteries or a rechargeable battery. Selecting the track number or track name directly.
To play the selected track, press the jog dial. Mega Bass function intensifies low frequency sound for richer quality audio reproduction. It affects only with the headphones. Checking the remaining time or the playing position. If you want to check the remaining time or the recording position while recording or in stop mode, see Checking the remaining time or the recording position. To prevent the buttons from being accidentally operated when you carry the recorder, use this function.
The output is analog. The recorder plays the MD digitally and sends analog signals to the connected equipment. Premastered MDs cannot be edited. Note that once a recording has been erased, you cannot retrieve it. Check the track number before erasing. To erase a part of a track Add track marks at the beginning and the end of the part you want to erase, then erase the part. You can quickly erase all the tracks and data of the MD at the same time.
Be sure to check the contents of the disc you want to erase. You can add track marks so that the separated part after the track mark is as a new track.
The track numbers will increase as follows. When you record with analog line input, unnecessary track marks may be recorded. You can erase a track mark to combine the tracks before and after the track mark.
The track numbers will change as follows. The combined track whose mark has been erased is recorded with the date and time of the beginning of the first of the two combined tracks. You can label the MDs and tracks you recorded with letters, numbers, and marks. Each label can be made up of up to characters, and each MD can hold up to characters.
Rotate the jog dial to select a character, and press the jog dial to enter the selected character. The cursor shifts rightward and stands by for the input of the next character. To relabel recordings Do steps 1 and 2 to display the label of the track or MD. You can use the recorder on house current or as follows. In the recorder Using on a lithium ion rechargeable battery. Battery indication appears in the display and charging starts.
When charging is completed, battery indicator disappears. Replace the dry batteries or charge the rechargeable battery. On heat build-up Heat may build up in the recorder if it is used for an extended period of time. In this case, leave the recorder turned off until it cools down. On the headphones Road safety Do not use headphones while driving, cycling, or operating any motorized vehicle.
It may create a traffic hazard and is illegal in many areas. It can also be potentially dangerous to play your recorder at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations.
0コメント